VC17M Red .75l

VC 17m* is VC's world famous innovation in the field of drag reduction antifouling. The original antifouling with "non-stick" technology. Metallic copper powder is added to VC 17m's thin fluoro microadditive film to create a hard, super-smooth antifouling coating. Its fluoro microadditive based film shrugs off marine growth, and the exceptional surface smoothness means boat speeds can actually increase by as much as 10%.

Some Important Points It takes several weeks of immersion to develop final color. It may not change color above the true waterline.
Thin film Antifouling temperature should be minimum 10°C/50°F and maximum 32°C/90°F. Ambient temperature should be minimum 7°C/45°F and maximum 35°C/95°F. Substrate temperature should be minimum 7°C/45°F and maximum 35°C/95°F.
Compatibility: Apply to clean, dry, properly prepared surfaces only. Bare surfaces must be sanded. Do not apply VC 17m* over graphite antifoulings. Do not apply over soft antifouling paints. Do not apply VC 17m* over aluminum.
Number of Coats 2-3
Coverage (Theoretical) - 313.5 ft²/gal by roller
Recommended DFT 0.4 mils dry
Recommended WFT 5 mils wet
Application Methods Roller, Airless Spray (Electric)